English      Русский        中 文 
Специалист по оборудованию профилирования металла
Линии холодного профилирования
Комплектующее оборудование для
Изделия, обработанные на линия
Защитная плёнка
Адрес: No. 545, Qianhu RD, Wuxi city, Jiangsu province, P.R. China
Почтовый индекс: 214151
Тел.: +86-510-83217802
Факс: +86-510-83202261
E-mail: gray@wxgc.com
Контактное лицо: Mr Yi (Олеся)




GWC Silo Stiffener Roll Forming Machine

Our GWC silo stiffener roll forming machine is exclusive in China due to the distinctiveness of the punching process. On the production line, punching process could be carried out on both flat and inclined surfaces, and this product is able to fabricate stiffener as well as connecting plate.

Processing Flow
Active hydraulic decoiling → guided material feeding → straightening → rolling → punching (machine halted) → hydraulic shearing→ material collecting

Finished Product
With a self-explanatory name, this silo stiffener roll forming machine is mainly designed to manufacture stiffeners that are used to reinforce silos to keep them safe. The stiffeners for small-diameter silos are interconnected through overlapping joint, while stiffeners large and high silos are interconnected through butt joint and then fastened with connecting plate.

The silo stiffener has obtained two national patents as illustrated below.

1. One clamp-feeding and straightening machine (ZL201120054578.7). The upper compression roller is installed on the top of the machine frame and it is able to move up and down. With the help of this device, the internal stress of the steel plate will be evenly distributed.

2. One assistant feeding device (201120055171.6). The retainer plate and the pressing device are movable, and the pressing device is designed to flatten curved parts on the front side of steel plates to facilitate feeding process.


1. 5T hydraulic decoiler
2. Straightening machine
3. Shape forming machine
4. Punching machine
5. Curving machine

6. Hydraulic shear
7. Hydraulic station
8. PLC control cabinet
9. Stacker

Model GWC Note
Applicable material Galvanized sheet or carbon steel This machine is customizable upon each customer's requirements and the characteristics of processed material.
Feeding width About 310-500mm
Processing thickness 2-8mm
Roller material Ball bearing steel which goes through heat treatment and surface finish process.
Main motor power / hydraulic station power 55kW / 55kW These parameters can be set according to the required production capacity.
Forming passes 13
Forming speed 1-2 pieces/minute
Machine dimensions 30×5×2.5m
Machine weight 70T

Related Names
Metal Grain Silo Forming Equipment | Bulk Material Storage Silo Column Machine | Farm Silo Fabrication Machine





Product name:

Your name:






Copyright © 2016 Guangcai Inc. All rights reserved.